If you check my previous posts under Anti-theft system I have completed so many checks, I know its not the fuel pump, crank or cam sensor which were replaced. Fuel pressure is 44 psi. I have to wait about 1 to 2 minutes before I can start my 2000 expedition Eddie Bauer 4.6L RWD. In other words, if I try to start it, it only cranks and no start. However, if I put the key in run position, I have to wait a few minutes before it starts. Sometimes it still will not start. HELP!!!
Getting no codes on OBDII.
Need help!!!! Took it to the dealer who told me it was a crank sensor. After I reminded him it was replaced, he told me it was the PCM. If its the PCM would it still start? Why is it waiting to start????? What else could be causing the issue of waiting to start. Something must be delaying or starting to go out...
Link to "anti theft thread"
http://www.expeditionforum.com/f16/anti-theft-system-28934/
Getting no codes on OBDII.
Need help!!!! Took it to the dealer who told me it was a crank sensor. After I reminded him it was replaced, he told me it was the PCM. If its the PCM would it still start? Why is it waiting to start????? What else could be causing the issue of waiting to start. Something must be delaying or starting to go out...
Link to "anti theft thread"
http://www.expeditionforum.com/f16/anti-theft-system-28934/
Last edited by a moderator: