Helwig stabi.

[Bmac1955]

Going to place an order for front and rear Helweg sway bars.

 

[Bmac1955]

Sorry for half assed post. 40k on a 2019 xlt. Placing an order for front and rear sway bars. Would one replace the attachments also. Swaybar bar end links?

 

[wakeboarder]

If reusing the stock links, don’t use an impact on them and observe the torque specs.

 

[Bmac1955]

If reusing the stock links, don’t use an impact on them and observe the torque specs.

Edited by moderator: Keep your comment out of the quote box (above marked by line on left) to not have your comment hidden at end of quote. End edit
Thanks for the reply. I do plan on ordering the pair. Planning to have a suspension shop do the install.

 

[Bmac1955]

I do have plans on ordering them thru a suspension shop and do the install. Just curious about purchasing the links as well. I just noticed my right front shock leaking and plan to have all 4 replaced at Ford along with an alignment.

 

[Bmac1955]

Sorry..........Big hands small phone. What can I say.

 

[TheDoug]

Sorry..........Big hands small phone. What can I say.

I have that problem too.

There a big thread here on the links to buy. I forget model numbers of end links but I bought moog for the rear and energy suspension for front (fronts requiee a little trimming see the post for details). If you need help feel free to pm me.

Edit.... search hellwig and you should see it.

 

[GixxerJasen]

Energy Suspension part number here: https://www.expeditionforum.com/threads/rear-sway-bar.42911/page-19#post-423901

 

[Bmac1955]

Thanks for the info. I did order front and rear sway bars. Takes 4 to 6 weeks I was told. They said due to making them. I think BS. The company is here in California. So.........

 

[cmurphy2]

I would use OEM links. I tried Moog and started clicking in less than 5K miles.

 

[5280tunage]

I would use OEM links. I tried Moog and started clicking in less than 5K miles.

I have had good luck with the energy suspension links but I think even they are knocking at this point. My factory ones didn't fare very well either, I think they are too weak to handle the torque that the hellwig can produce, but that's just my observation, not scientifically measured. I have a new set coming soon that I'm going to try just to see if they are much better.