What Are These Codes? P0135 & P0155

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

stamp11127

Full Access Members
Joined
Mar 10, 2012
Posts
6,218
Reaction score
1,250
Location
Temple, Georgia
p0135 - Oxygen O2 Sensor Heater Circuit Malfunction (Bank 1, Sensor 1)

p0155 - 02 Sensor Heater Circuit Malfunction (Bank 2 Sensor 1)

Read more at: http://www.obd-codes.com

Worry about it if they come back.
 
Last edited:

Bedrck47

Full Access Members
Joined
Jul 4, 2014
Posts
5,641
Reaction score
652
Location
Elizebethtown, PA
P0135 - HO2S Circuit Malfunction (HO2S-11)
Description: During testing the heated oxygen sensor (HO2S) heaters are checked for opens/shorts and excessive current draw. The test fails when the current draw exceeds a calibrated limit and/or an open or short is detected.
Possible Causes: Vacuum hose disconnected on EGR system module (ESM) applications.
Short to VPWR in the harness or HO2S.
Water in the harness connector.
Open VPWR circuit.
Open GND circuit.
Low battery voltage.
Corrosion or poor mating terminals and wiring.
Damaged HO2S heater.

P0155 - HO2S Circuit Malfunction (HO2S-21)
Description: See the description for DTC P0135.
Possible Causes: See the possible causes for DTC P0135.
Diagnostic Aids: See the diagnostic aids for DTC P0135.
 

2005Expedition

Full Access Members
Joined
Jun 19, 2014
Posts
173
Reaction score
11
Location
Jackson
I had the same code not too long ago, turn out the preview owner put a wrong o2 sensor in. it been over month and 1300 miles round trip and no CEL , Knock on wood
 
Top