chuck s
Full Access Members
- Joined
- Dec 20, 2006
- Posts
- 1,823
- Reaction score
- 672
I'm highly impressed with the Ford brake controller.
Not a whole lot other than what I noted that can be done with Forscan on the Expedition as it lacks some of the modules that other Fords have but activating the brake controller consists of changing two digits in the ECU and has been documented here.
Forgot I also activated the Engine Hour Counter on the dash display. Just for curiosity. Shows engine idle hours which is a surprisingly number but the car has remote start and I've been using it. It may be possible to activate remote start but you need the appropriate key or fob -- since I have it I didn't investigate.
I'm looking for a way to shut off the power outlets with the ignition but without success so far.
-- Chuck
Not a whole lot other than what I noted that can be done with Forscan on the Expedition as it lacks some of the modules that other Fords have but activating the brake controller consists of changing two digits in the ECU and has been documented here.
Forgot I also activated the Engine Hour Counter on the dash display. Just for curiosity. Shows engine idle hours which is a surprisingly number but the car has remote start and I've been using it. It may be possible to activate remote start but you need the appropriate key or fob -- since I have it I didn't investigate.
I'm looking for a way to shut off the power outlets with the ignition but without success so far.
-- Chuck