Update all versions of Ford Sync 3 to the latest Sync 3.4

[techdude99]

@Jon F mentioned an issue above...


Sent from my iPhone using Tapatalk Pro

@LokiWolf Thank you. My old eyes missed it.

@John F I have XM and just installed the latest Sync on my 2019. I'm also missing the artwork and I can't connect to any WiFi networks. I'll report back later tonight.

 

[5280tunage]

21020 took quite a long time to apply since I did the maps update as well, had to drive around for over 40min. But the update does seem a bit faster. Had lots of troubles getting the updater to download packages though, the would fail a ton, took at least 10 attempts for all of the packages to download successfully.

Definitely had to repair AAuto as well.

 

[techdude99]

My updates errored out on a 32gb usb drive and finally worked on a 64gb drive.

 

[techdude99]

Has anyone on the latest version performed a master reset due to some strange issues?

 

[LokiWolf]

Has anyone on the latest version performed a master reset due to some strange issues?

Did the Master reset fix the art issue?


Sent from my iPhone using Tapatalk Pro

 

[techdude99]

I was trying to avoid a reset, but I'll try it tomorrow to see if that resolves the issues.

 

[techdude99]

Master Reset did not bring back album art.

I was able to connect to my cell phone hot spot but not my home network with a "...Sync unable to connect...," to my WAP. Very strange...

Tried rebooting several times. No impact. I re-ran the install again. Still no install errors. Same result.

 

[LokiWolf]

Master Reset did not bring back album art.

I was able to connect to my cell phone hot spot but not my home network with a "...Sync unable to connect...," to my WAP. Very strange...

Tried rebooting several times. No impact. I re-ran the install again. Still no install errors. Same result.

I am wondering if it is the APIM version?

Are you forcing WPA2 or WPA3 on your AP? Have you got 2.4 turned off?


Sent from my iPhone using Tapatalk Pro

 

[techdude99]

I am wondering if it is the APIM version?

Are you forcing WPA2 or WPA3 on your AP? Have you got 2.4 turned off?


Sent from my iPhone using Tapatalk Pro

I'm forcing WPA2-AES with 2.4 and 5Ghz enabled. How do I view the APIM version? Is the Ford only 2.4Ghz?

 

[DWs-TTEB]

I'm forcing WPA2-AES with 2.4 and 5Ghz enabled. How do I view the APIM version? Is the Ford only 2.4Ghz?

WPA2 is old, easily hacked with a Kali box, you sure you didn’t mean WPA3?