Search results

  1. AuctionExp

    Body Mount Bushing Instructions

    Hey Ben, I've got a clunk/bang noise and I'm convinced it's a bad body mount. That said, I came across your post while searching for body mount help. In case you still need, the energy suspension site has a one sheet reference for these...
  2. AuctionExp

    strutmaster front coil over shocks with non-air ride suspension?

    I spoke with Darrell @ Strutmasters today. He advised that the coil-over shocks would fit and that the ground to top of wheel well would be 36". I asked if these coil-over shocks could be disassembled so I could use a longer length shock and custom Pohl spring to increase ride height but he...
  3. AuctionExp

    strutmaster front coil over shocks with non-air ride suspension?

    quick update: I chatted online with Strutmasters about my inquiry and asked about a small ride height increase. Unfortunately they were not able to answer my questions during the chat session and advised that I call. After I call them, I'll post an update here.
  4. AuctionExp

    strutmaster front coil over shocks with non-air ride suspension?

    Has anyone ever installed the strutmaster front coil over shocks in an Expedition that did NOT have front air ride suspension? I'm contemplating this, thinking that this would increase my front right height and act as a leveling kit (sort of) without having to crank on the torsion bars. If...
  5. AuctionExp

    CEL goes off without fixing the problem?

    So much for no CEL. It's back on. Code that is present is P0430, cat efficiency, Bank 2 (is Bank 2 the driver or passenger side?)
  6. AuctionExp

    CEL goes off without fixing the problem?

    So I've got a '97 Ford Expedition (5.4L EB, 4wd) and the check engine light has been on because of a bad cat converter for quite a bit, and then just yesterday it turns itself off? I shut off and re-started the vehicle to make sure the check engine bulb was not burnt out (it was not). Has...
  7. AuctionExp

    Portland OR/SW WA repair shop needed

    Hi Guys, I'm in Hillsboro (SW of Portland) and I'm looking to get a referral for a shop in my area that can help with engine management/tuning etc. I'm hoping that someone would be able to recommend a repair shop in the area?
  8. AuctionExp

    1998 expedition laser red Eddie Bauer parting out

    Are you still parting out the truck? Myself and a couple of others have left replies, but there have not been any updates yet. I may be looking for more parts, please let us (the forum) know if you are still selling. Thanks
  9. AuctionExp

    1998 expedition laser red Eddie Bauer parting out

    Headlight Switch and other parts? Looking to see if the headlight switch is available? I'm looking for the switch that has both fog lamps and auto headlights. I'm looking for the complete switch (including bezel) See picture. I saw that someone else asked for the GEM Module. Is this still...
  10. AuctionExp

    Raising an airbag sensor

    ReefKrazy, I got a new upper sensor bracket off Ebay (mine was bent) and it just got put in yesterday, and while the sensor no longer touches the steering column, it now looks like the lower bracket got moved or is out of position. When you look at your front sensor, is the sensor...
  11. AuctionExp

    Raising an airbag sensor

    Thanks reefkrazy, I can't wait to see the stock set-up so I can get this fixed. I did have the wheel off when I put in some sway bar bushings, but I don't remember moving the ride height sensor.
  12. AuctionExp

    Raising an airbag sensor

    Here are a couple of pics I took looking down at the top of the bracket/sensor from under the hood. You can see where the bracket/sensor has torn the bellows of the steering column and is now rubbing against the column.
  13. AuctionExp

    Raising an airbag sensor

    Reefcrazy, Any chance you could take a picture looking down at the top of the drivers side front ride height sensor from the engine bay? My check suspension light came on, and when I looked at the top of the bracket/sensor from under the hood, I can see where my sensor mounting bracket has...
  14. AuctionExp

    Knock When Turning Steering Wheel

    I've been experiencing the same thing. I hears a single knock when I turn almost all the way to the right, and I only hear it on the left side. I took a peek under and I can move the front sway bar left to right with my hand (probably not a good thing) so I am going to order a sway bar link...
  15. AuctionExp

    More than one Throttle Body spacer?

    Good points yudaman and toms. I've guess I've been reading too much of the manufacturer propaganda on the web. I picked up a used BBK Throttle body, and the previous owner included a throttle body spacer with the TB. I was taking a look at it, and the ones that are sold online and I was...
  16. AuctionExp

    More than one Throttle Body spacer?

    Crazy thought here. If one TB spacer is good, why not two? I've got a '97 so I should have room. Has anyone tried this before?
  17. AuctionExp

    CB Radio mounting suggestions for '97 EB

    Hi all, I'm looking to mount a CB Radio in my '97 EB and I wanted to see what kind of suggestions/locations are out there for locations and style of mount? If you have pics of your current setup I'd love to see them. AuctionExp
  18. AuctionExp

    Anybody in Macon, Ga want to help a guy in Portland, OR?

    Thanks sgtowing. If I find one in FL, I'll let you know :) I've seen the other kits out there, but I have my head wrapped around the K&N kit right now. Seriously though, if anybody is considering let me know. Thanks!
  19. AuctionExp

    Anybody in Macon, Ga want to help a guy in Portland, OR?

    34 views and no offers yet? What would make it worth your time ($$)?
  20. AuctionExp

    Anybody in Macon, Ga want to help a guy in Portland, OR?

    Looking for a fellow forum member in Macon, GA who would be willing to help another member in Portland, OR. Basically, I found a K&N air intake on Craigslist in Macon, GA but I am in Portland, OR. Would anybody in the area be willing to pick this up ( I would send cash via PayPal in...
  21. AuctionExp

    97 EB w/ Air Suspension, checking ride height

    97 EB w/ Air Suspension. The compressor has been coming on w/ more frequency and the 'check suspension' light illuminates from time to time. Does anyone have the stock ride height or distance measured between the top of the tires and the wheel well clearance? Also, outside of stock...
  22. AuctionExp

    P0340 97 Exp 5.4 4x

    Thanks Robbie, Do you have the step Z1? It's referenced on the second page, but that specific test is not shown on the pages you scanned. Thanks for checking.
  23. AuctionExp

    P0340 97 Exp 5.4 4x

    Thanks Toms and tsprgr, With the key on/engine off I checked the connector for the sensor which is plugged into the air intake tube. I got a reading of 4.65v. I tried to check for voltage at the back of the connector to the camshaft position sensor, and even up towards where the wires...
  24. AuctionExp

    P0340 97 Exp 5.4 4x

    Thanks Toms89, Yes, my sensor is in the very same place as yours. And it is the 2 wire VR (variable reluctance) type. Since this is the only sensor/circuit that I am getting a check engine light for, I am thinking that somewhere there is an open/broken wire/bad connector? I checked...
Top