Front receiver hitch install

[DavidC]

Has anyone installed a front receiver hitch? Seems simple enough...famous last words though.
This is the hitch:
https://www.etrailer.com/Front-Hitch/Curt/C31083.html

 

[scottdm]

Here's a thread of a front hitch installed on a 3rd gen, but haven't seen any yet for the 4th gen. The front of the Expedition frame is the same as the front of the F150 frames, so bolting to the frame as shown in the link you provided shouldn't be an issue. The only potential wild card is the dimensions on the Expedition front bumper/facia and what trimming may be required. Perhaps you could be the first to give it a try and let us know how it goes.

https://www.expeditionforum.com/threads/front-hitch.38737/#post-338336

 

[Edistobob]

Yes, I installed a Curt front receiver hitch on my Plat Max right after I took delivery. I use it for a front bicycle carrier. No problems at all with the installation other than having to deal with the weight of the hitch while I installed it by myself.

 

[scottdm]

Yes, I installed a Curt front receiver hitch on my Plat Max right after I took delivery. I use it for a front bicycle carrier. No problems at all with the installation other than having to deal with the weight of the hitch while I installed it by myself.

Any chance you could post a couple of photos? Curious what trimming was required on the air dam, etc.

 

[doktoroktobor]

fascinating! never thought of a front hitch. was about to buy a Thule 4 bike carrier for the rear. i like the idea of seeing the bikes while driving/parking, and not getting in the way of the trunk.

what are the ad/dis-advantages front vs rear? are any of the collision sensors or adaptive cruise sensors screwed up more by going front mount?

 

[Edistobob]

Any chance you could post a couple of photos? Curious what trimming was required on the air dam, etc.

Try these. I slightly over trimmed mine on the left side as you look at it, but I can live with it.

 

[Edistobob]

fascinating! never thought of a front hitch. was about to buy a Thule 4 bike carrier for the rear. i like the idea of seeing the bikes while driving/parking, and not getting in the way of the trunk.

what are the ad/dis-advantages front vs rear? are any of the collision sensors or adaptive cruise sensors screwed up more by going front mount?

The main advantage for me is better weight distribution while I’m towing our trailer. Probably the biggest disadvantage is having the bikes out there in front to catch all the rain, bugs, etc., Road spray from traffic ahead, and the constant wind that occasionally blows some Lube from my headset. it does interfere with the front parking sensors so I can just turn them off when the bikes are loaded. I have had no trouble with the adaptive cruise control or front camera. The hood opens with no problems. Also if you drive at night there can be some shadows and interference with the headlights depending on your bicycles.

 

[DavidC]

Thanks for posting the photos. I'm a huge fan of the front hitch, had them on previous vehicles. But sometimes they can be a bit low so it pays to have a "hitch riser" for things like a bike rack. Or in my case, a motorcycle carrier. I have two bikes so if I need to transport two I have that option.

 

[Edistobob]

With my carrier and bikes, I prefer not to use a riser even though the receiver is low. Using a riser would put the bikes into my line of sight and interfere with seeing traffic. As is, the handlebars are virtually level with the hood.

 

[Saltwater Soul]

I find that a front hitch is great for positioning trailers into very tight spots. You can also mount a removable winch there which is very useful. I had this setup on my old diesel Suburban 4x4 that I used for lots of off road adventures. Only installed the winch when needed.

 

[DavidC]

I have a front hitch as well. Highly recommended. I use mine for a Yamaha dirt bike hauler while I pull an RV trailer on the rear. I tried it the other way around but it just didn't feel right.

 

[jhcorley]

Looking for some better pics of this install, anyone done this recently or have some info?

 

[jhcorley]

TTT

ANYONE?

 

[JimW]

I would like to see a picture also of this front hitch mounted on an Expedition. All I can find are pictures of it install on the F150. I have removed my air dam so I no it will be exposed but I'm worried it may sit too low. Curt stated when mounted it sits about 1 inch below the bottom of the bumper.

 

[chuxster]

Great thread, thanks all! I pull a travel trailer with my 2019 Expedition. I just picked up a 2017 Honda Super Cub C125A. At 240 pounds, even if I could figure out how to carry it on rear of the Expy, it would add too much tongue weight. Can't add it to rear of trailer due to the way the trailer is built. Don't want to swap the Expy for a truck, so ended up looking at front hitch with a motorcycle carrier. I think it will work. Hate to think about cleaning all the bugs off the the Cub after a trip south! I generally only tow during daylight hours.
Any thoughts/advice/warnings?

 

[Squark]

Keep an eye on your payload capacity. If you’re close to the max tongue weight from your travel trailer and add a few hundred pounds to the front, there’s not a lot of capacity left for people and stuff. Also watch your front GAWR. Unloaded my front has about 400lbs of capacity available.

 

[JimW]

Alright here are some pictures. Bought a winch but haven't tested yet. Used it with the bikes last weekend for trip to Hatteras and worked great.

 

[jhcorley]

Have any pics with the bike rack attached? Thanks.