Glenn Sawyer
Well-Known Member
i need to know what wires i need to use to get power to the seat from an 03 navigator. just the driver side power seat. not worried about the heat or cooling right now
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Should be a dark green wire coming off a 30A fuse 109 feeding power to the seat control module (located under the seat...) , and a black ground wire. Then you have a whole spider web harness running from the seat switches to the module and from the module to the seat motors.
The power seat wiring diagram is on page 4537 of the service manual. If you don't have a service manual you can download one here: https://spaces.hightail.com/space/hoVVsN5P2A