Millerwelds1
Active Member
Yeah I was amazed that it was full, and was mad at myself for taking so long to put one on it.
Sent from my SM-G975U using Tapatalk
Sent from my SM-G975U using Tapatalk
Catch cans anyone?
- Thread starter mrmachinist
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
In the winter it is mostly water vapor. Same amount of oil, at least based on watching mine separate, vs summer collection amounts.
Sent from my iPad using Tapatalk Pro
Millerwelds1
Active Member
Yeah, it had the viscosity of water with a little oil in it. Makes sense.
Sent from my SM-G975U using Tapatalk
mrmachinist
Member
Well tried to drain the can. About 2300 miles on it and nothing came out.
I pulled it off so I could unscrew it and see inside.
It’s a layer of thick oil. Almost pudding consistency. About 2 oz.
Anyone ever get anything like this?
Sent from my iPhone using Tapatalk
I pulled it off so I could unscrew it and see inside.
It’s a layer of thick oil. Almost pudding consistency. About 2 oz.
Anyone ever get anything like this?
Sent from my iPhone using Tapatalk
3tonsoffun
Full Access Members
Jesus, not that thick. What brand can?Well tried to drain the can. About 2300 miles on it and nothing came out.
I pulled it off so I could unscrew it and see inside.
It’s a layer of thick oil. Almost pudding consistency. About 2 oz.
Anyone ever get anything like this?
Sent from my iPhone using Tapatalk
mrmachinist
Member
UPR can.
2019 expedition 3300 miles installed the can at 1000 miles.
Sent from my iPhone using Tapatalk
Installed the JLT on my 19 tonight. Had to mount it slightly differently than the instructions said but otherwise it was a simple install. My wire harness was further to the right than other photos ive seen which is why it didn't want to fit, just had to flip the bracket over. 
Sent from my SM-G970U using Tapatalk
Sent from my SM-G970U using Tapatalk
3tonsoffun
Full Access Members
Could be break in. Goes to show that the new DI and port injected 10 spd 3.5s still need the can...
3tonsoffun
Full Access Members
Don’t forget to clean the filter in there every 10kInstalled the JLT on my 19 tonight. Had to mount it slightly differently than the instructions said but otherwise it was a simple install. My wire harness was further to the right than other photos ive seen which is why it didn't want to fit, just had to flip the bracket over.
Sent from my SM-G970U using Tapatalk
Millerwelds1
Active Member
Shoot, I Check mine every 2500
Sent from my SM-G975U using Tapatalk
Sent from my SM-G975U using Tapatalk
