rosario1991
Full Access Members
I always keep few things in mind while going to buy something. It's quality, cost and reliability.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I bought a 1972 26ft bumper pull camper that was 800 miles away. it was a hard pull to say the least I had plenty of power just didn't have enough suspension. any body know suspension up grades for an 02 expedition
I just put a write up about that in the tech info section along with some info about the MAF. Also another thing to look out for. CLEAN THAT THING ONCE IN A WHILE, JEESH!!!
Link..... http://fordexpeditionforum.com/showthread.php?t=50
the door a jar problem. shoot some WD40 into the hinge so the lights switch will push in.
the vacuum breathe tube on the rear axle. make sure its on there or it makes some weird noise in the axle. (does anyone know where it goes to. it goes into the frame and from there idk.) mine came off right at the nipple on the axle. so its on there with a little super glue and electrical tape.
window actuators in the front. (still have yet to fix mine.) as for the hose that was the latest cop to go out. coolant dripped on mine. idk how ford fixed the hose but its the same one.