Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Yeah they completely blow my current retro out of the water and those were a huge upgrade over stock.Well dang those look nice I want a set
Sent from my SM-G892A using Tapatalk
Got the retro rolling again this week. Projectors are permanently mounted in the reflector and I locked them in with JB weld tonight. Hoping to have these closed up this week.
View attachment 27971
View attachment 27972
View attachment 27973
Are you talking about the step? The step is normal. Each projector has it but you really only see the drivers side because the passenger side is washed out by the drivers side.I think your alignment is off because that light line is not straight at all
That is the drivers side cutoff. If your 2016 doesn't have it then you may wanna take a look at the bulb seating. If you have reflector housing on the 16 the cutoff will be less pronounced anyway but still exists.View attachment 28037
This does not look normal. I’ve never seen any car that has that drastic of a difference in being level. I bought SL1s for my 2016 and they look better than that??
Looks like it’s out of vertical alignment. Stock cars have a clear crisp distinct line tht has no driver side break. I have projectors and from factory and after I installed SL1s it has retained a crisp straight lineThat is the drivers side cutoff. If your 2016 doesn't have it then you may wanna take a look at the bulb seating. If you have reflector housing on the 16 the cutoff will be less pronounced anyway but still exists.
There is some glare there from no shrouds being installed yet but that will be gone once the shrouds are painted.
Heres a shot with the camera ISO turned way down so you can get a better idea of whats happening here. Every projector has this cutoff and some larger that others but the low area is to keep the light oyt of oncoming traffics eyes.
Also in that first picture above, the passanger side is slightly higher out to the right side of what you have circled. I wasn't working on vertical adjustment because that will happen once the lights are installed. Here I was checking rotation and distance apart.
View attachment 28042