Hello everyone! New EX owner here. Purchased from Gila River Police, my 2011 runs great! So far everything works well. I replaced the stock radio with a carplay type recommended from a thread on this forum. My question is this: The factory interior lights don't come on when the door is opened...
Hello, I recently changed my 2006 ford expedition over from air suspension to normal coils and was wondering if anyone knew the correct code I would need to replace the default line in ForScan so I don't get the Air Suspension warning message when I start my truck .
Thanks
i have a 2013 ford expedition and im planning to install 9.00 17R sand tire's which has a circum of 856 mm.
my truck came with 275/55/R20 tires and im running 275/60/R20 for a year now and i felt a little difference when shifting and downshifting, so im assuming that im gonna need to calibrate...
Hey all,
Been lurking for a few years, but finally ran into something I cannot figure out. For background, I've always done all my own work and generally have been able to fix any issues that have come my way through trial and error and using forums such as these along with a lot of youtube...
Hey guys I just recently installed Sync 3 into my 2015 Expedition XLT that only had the 4" display. I used the harness from https://breeves002.net/product/4-to-8-plug-n-play-conversion-expedition/
Now I need to get the steering controls to work. I'm using my old ACM so the volume works on the...
Hello Everyone! I've recently been messing around with ForScan on my 07 XLT. I've successfully turned off the seat belt reminder, and reset the transmission control module. For some reason, the BCM, along with several other modules do not appear in Forscan for me. I have the extended license (so...
I wasn't sure whether to post this here or in the Forscan sub-group, so mods please move if needed. I looked through the Forscan group and didn't see anything resembling this.
Since my wifes' Expy only has one key and no fobs since we bought it, I figured I'd try to program another key for it...
Still a newbie here, but have had luck on past projects, with help from here. I am trying to use ForScan to fix 2 issues, 1st I installed LED turn indicators cause my local shops were out of regular bulbs and this caused the double speed flash(which I have heard is different from hyperflashing...
Hello,
I inadvertently changed one of the values in the [bdycm] to adaptive, then changed it back to normal (I think). Now the little icon on the dash isn't displayed. Attached are two images of where the module is in relation to FORScan and the module itself. Cruise control does function, but...
Quick question - are there any limitations to the IOS version of FOREScan? I have a MAC that runs Windows but I'd prefer to run in IOS if it's the same functionality. Looking to disable auto stop and possibly other features. Any other options I should consider? Thanks!
EDIT: 2019...
Hi all, new member here. I recently purchased a 2020 Expedition MAX which did not come with the factory trailer brake controller. I ordered the Ford part and will install myself. I know that I can either have the dealer flash the ECU or do it myself with an ELM327 and Forscan.
My question is...
Hello to all, (2005 Expedition King Ranch 5.4 Triton)
After finally getting my Expy on the road and past inspection I now face another hiccup which I am in need of wisdom.
While using FORScan (paid version) to calibrate the Steering Wheel Angle Sensor I reach to the part where I am asked to...
Have a 2020 Expedition Limited. Made one change via FORscan to stop double horn beep using the easy mode. The double beep stopped, but so did door chimes and seatbelt warning.
Could one change in the friendly mode affect other settings..??
I’ve been playing around with Forscan after updating my Sync from 3 to 3.4.
Has anyone had any luck getting radio icons to show up? I have this set currently: “4=HD radio enabled & DAB avail & SWC not avail & CGEA 1.3”
What’s the proper coding sequence to turn off auto start stop? Did you...
Anyone on here have an as built table for Gen 3 Expy's?
Or are they cross compatible with something else?
Specifically looking for as built IC on a vehicle (2013-2014) with OEM Trailer Brake Controller for comparison to mine.
Thanks.
2012 Expedition no TBC
ICM 720-01-01 9105 7DFF...
Recently picked up a clean one owner 2017 EL XLT after being without my 98 EB for a few years. Love it so far. It doesn't have the HD tow package, and I really want to add a factory trailer brake controller and enable it through forscan. I would also like to add a transmission cooler, since I'll...
I'm new here. I have searched the forums for this problem and have found some close threads but nothing exactly like what I've done.
So, I did something stupid, and half knew that I was going to brick my vehicle before I did it.
Long story short is that the second fob for my vehicle broke in...
Guys,
Like many, I find it very inconvenient to have to get back to they main sync infotainment screen from apple carplay to see the outside air temperature, this includes asking Siri. I find it baffling that the Ford design team could not add the outside air temperature to the 8" digital...
Hello all,
I'm not finding much information on this and that may be simply because it hasn't been available long enough for the tech guys to figure it out. But, my issue is with the timeout of the WiFi when the vehicle is turned off. I've been able to extend the stereo play time through...
OK everyone, I have a 2014 Expy and I want to modify the programming for ALL available options in this model year. I have FORSCAN and I have the OBD reader and can get to the modules fine. Being this is not programmed IPE (in plain english) I need the breakdown of the codes in order to change...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.